# KL-T7300 Manual Medical Pendant — Anesthesia-Ready Ceiling Supply Unit for Operating Rooms
Quick answer: The Keling KL-T7300 is a manual medical pendant (medical hanging tower, series code KL-T·IIBM) designed for operating rooms requiring a full anesthesia gas supply at ceiling level. Its standard utility configuration covers four power outlets, one internet outlet, compressed air, oxygen, suction gas, nitrous oxide and anesthesia gas — all via German standard terminals. It features horizontal rotation with a mechanical friction damping brake. It is manufactured by Keling Medical (Keling Medical).
Quick Facts
- The Keling KL-T7300 is a manual medical pendant engineered for operating rooms where anesthesia gas and nitrous oxide supply are required at the point of care.
- Standard gas terminals on the KL-T7300 include compressed air, oxygen, suction gas, nitrous oxide and anesthesia gas, all in German style format.
- The arm rotates horizontally with a mechanical friction damping brake for precise, drift-free positioning.
- The control cabinet is formed from imported high-strength aluminium alloy using one-piece extrusion molding with primary oxidation surface treatment.
- Gas pipelines, power supply and computer communication lines are arranged in independent routing channels to prevent interference.
- The KL-T7300 is produced by Keling Medical, a Chinese medical equipment manufacturer with more than 20 years of industry experience.
Overview
The KL-T7300 manual medical pendant is purpose-configured for operating rooms where the full range of anesthesia gases — including nitrous oxide and anesthesia gas alongside oxygen and compressed air — must be delivered from the ceiling. By positioning all gas outlets at pendant level, the KL-T7300 eliminates long floor-level gas hoses that cross the surgical field and reduces the risk of disconnection or contamination during procedures. This makes it the preferred ceiling supply column for general surgery, orthopedic, cardiac and dedicated anesthesia-intensive ORs.
The pendant's aluminium alloy cabinet is formed using Keling's patented one-piece extrusion process, which produces a structure with no welded joints — a key advantage for load distribution and long-term structural integrity. The primary oxidation surface treatment creates a hard, smooth exterior that resists hospital-grade disinfectants and is quick to wipe down between procedures. The non-slip molded aluminum tray on the pendant arm provides a stable platform for anesthesia monitoring equipment, infusion controls and accessory devices.
Horizontal rotation is controlled by a mechanical friction damping brake: the arm sweeps smoothly to any angle and locks precisely in place without settling or drift after release. Independent cable management channels route gas, power and data lines in separate conduits inside the column, protecting monitoring signal integrity and simplifying future service access. German standard gas connectors on all gas ports are rated for more than 20,000 insertion and pull-out cycles, meeting the demands of high-volume surgical scheduling.
Key Features
- Full anesthesia gas configuration — nitrous oxide and anesthesia gas included in the standard terminal set, alongside compressed air, oxygen and suction gas.
- German standard gas terminals — rated for over 20,000 insertion and pull-out cycles on all gas ports.
- Independent utility routing — gas pipelines, power supply and data lines run in separate internal conduits; prevents electromagnetic interference.
- One-piece aluminium alloy cabinet — imported high-strength alloy, patented extrusion molding, primary oxidation surface treatment.
- Non-slip aluminum tray — molded tray surface keeps anesthesia monitors and small devices stable during arm repositioning.
- Horizontal rotation with friction damping brake — smooth swing to any angle; locks precisely with no drift.
- Stable and safe structure — high-strength aluminum alloy with one-piece construction for enhanced durability and long-term reliability.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | KL-T7300 |
| Series code | KL-T·IIBM |
| Product type | Manual medical pendant (medical hanging tower) |
| Application | Operating room (clean OR, general OR) |
| Cabinet material | Imported high-strength aluminium alloy, one-piece extrusion molding, primary oxidation treatment |
| Tray | Aluminum molding, non-slip texture |
| Brake | Mechanical friction damping brake |
| Rotation | Horizontal, precise positioning without drift |
| Gas terminals | German standard (over 20,000 insertion/pull-out cycles) |
| Power outlets | 4 |
| Data outlets | 1 internet outlet |
| Gas outlets | 1 compressed air, 1 oxygen, 1 suction gas, 1 nitrous oxide, 1 anesthesia gas (optional gases) |
Specifications are subject to change; dimensional tolerances may apply. Contact Keling Medical for the latest datasheet.
Applications
The KL-T7300 is suited to operating rooms requiring ceiling-level delivery of all major anesthesia gases alongside standard electrical and data connectivity: general surgery ORs, cardiac surgery suites, dedicated anesthesia workstation environments, thoracic surgery rooms and any procedural space where nitrous oxide and anesthesia gas are routinely used at the surgical table.
