KL-BC108 Manual Hospital Bed — 3-Function Manual Bed with Backrest, Knee-Rest and Height Adjustment

The KL-BC108 manual hospital bed adds height adjustment to the two-function manual backrest-plus-knee-rest capability found in the KL-BC107, making it the most fully featured manual bed in Keling Medical's standard ward range. Three independently operated cranks allow nursing staff to set backrest elevation, knee-rest elevation and overall bed height to the positions required at each stage of the patient's care, without dependence on electrical power.

Height adjustment from 450 to 760 mm gives the KL-BC108 the same transfer-safety and nursing-ergonomics benefit that drives demand for height-adjustable electric beds, without the cost or maintenance overhead of electric drives. The 450 mm low position permits safe patient self-transfer and reduces fall injury risk for lower-mobility patients, while the 760 mm upper position brings the patient surface to a height suited to wound care, bed-making and clinical assessment procedures.

The 70±10° backrest and 30±10° knee-rest provide effective anti-sliding positioning during prolonged head-of-bed elevation — a combination important for respiratory care, post-surgical recovery and pressure injury prevention. The 1035 mm external width offers adequate clearance for side rails and infusion pole accessories. At 200 kg rated load and a 1930 × 900 mm bed surface, the KL-BC108 covers standard adult inpatient requirements across general medical, surgical and rehabilitation wards.