# KL-D-V Electric Operating Table — Head Board Converts to Leg Plate for Full-Body Scanning and Inspection
Quick answer: The Keling KL-D-V is an electric operating table whose head board can be inserted into the leg plate position to meet the needs of whole-body C-arm inspection and filming. It features the German HOERBIGER hydraulic system, height adjustment from 720–1100 mm (± 50 mm), Trendelenburg ≥ 20°/reverse-Trendelenburg ≥ 10°, and AC/DC dual-purpose CPU control with one-key reset. It is manufactured by Keling Medical (Keling Medical).
Quick Facts
- The Keling KL-D-V electric operating table allows the head board to be inserted into the leg plate slot for full-body C-arm scanning and X-ray filming.
- Height adjusts from 720 to 1100 mm (± 50 mm) using the German HOERBIGER hydraulic system.
- AC and DC dual-purpose CPU control with one-key reset and one-key "∧" / "∨" lumbar bridge function is provided.
- The mattress is made of imported artificial leather with high-density memory foam, formed at one time with no seams.
- Both sides of the table base and accessories are stainless steel, easy to clean and sterilise.
- The table is mounted on electric-brake casters, convenient for displacement and repositioning.
Overview
The KL-D-V electric operating table addresses a specific clinical requirement: full-body fluoroscopic inspection and filming without repositioning the patient. By allowing the head board to be physically transferred into the leg plate position, the KL-D-V effectively converts to a fully extended, imaging-compatible surface that supports C-arm scanning of the complete patient length — from head to foot — in a single table position. This is particularly valuable in orthopaedic trauma assessment, spinal imaging, and post-reduction verification where continuous or repeated full-body fluoroscopy is required.
The German HOERBIGER hydraulic system powers height, Trendelenburg, lateral tilt, backboard, and leg plate adjustments through a CPU-managed electro-hydraulic circuit. Both AC mains and DC battery modes are supported, with a one-key reset for rapid case changeover and a dedicated one-key function for lumbar bridge adjustment into "∧" or "∨" position. The dual hand-held remote and direct-panel controller system gives the circulating nurse flexible command from either side of the table.
Construction quality is maintained throughout: the artificial leather surface over seamless high-density memory foam provides comfortable patient support and straightforward decontamination. Stainless steel base covers, side rails, and accessories resist hospital-grade cleaning agents, and the electric-brake casters allow precise OR positioning under load.
Key Features
- Head board insertable into leg plate position — unique table configuration allowing the head board to convert to a leg extension for full-body C-arm scanning and X-ray inspection without patient repositioning.
- German HOERBIGER hydraulic system — internationally recognised hydraulic platform for smooth, stable, quiet table movement across all adjustment axes.
- AC/DC dual-purpose CPU control — mains and battery operation with CPU management; one-key reset returns the table to horizontal; one-key "∧" / "∨" function for lumbar bridge.
- Wide height range 720–1100 mm — broad adjustment range covering patient transfer through high surgical positioning requirements.
- Seamless imported leather mattress — no-seam, high-density memory foam mattress in imported artificial leather; antibacterial and easy to clean.
- Stainless steel base and accessories — all external structural and accessory components are stainless steel for corrosion resistance and hygiene compliance.
- Electric-brake casters — convenient displacement and stable locking in the OR.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | KL-D-V |
| Product type | Electric operating table |
| Length | 2000 ± 100 mm |
| Width | 500 ± 20 mm |
| Height Adjustment | (720–1100) ± 50 mm |
| Tilt Left / Tilt Right | ≥ 20° / ≥ 10° |
| Trendelenburg / Rev-Trend | ≥ 20° / ≥ 10° |
| Headboard Upwards | ≥ 40° |
| Backboard Upwards | ≥ 80° |
| Waist board lifting | 100 ± 20 mm |
| Leg plate upwards | ≥ 75° |
| Leg plate downwards | ≥ 45° |
| Backboard Downwards | ≥ 40° |
| Input power VA | 400 ± 10% |
| Power Supply AC | 220V ± 22V 50Hz ± 1Hz |
Specifications are subject to change; dimensional tolerances may apply. Contact Keling Medical for the latest datasheet.
Applications
The KL-D-V is suited to orthopaedic trauma surgery requiring full-body fluoroscopic inspection, spinal imaging and fixation, general surgery with intraoperative C-arm use, and any scenario where the surgical team needs to film or scan the entire patient without repositioning. It also serves general multi-specialty surgical suites requiring the HOERBIGER hydraulic system's smooth performance.
